Drill bonder
Handle diameter:3.174mm
Mating concentricity:0.05mm以內
CNC
Grinding diameter:0.1-2.0 mm (0.004”-0.080”)
Chuck:B8
Cutting length:0-15 mm (0-0.6”)
Helix angle: 24-45o
Total length:30-50 mm (1.2”-1.5”)
OD grinding machine
Diameter range:0.1mm ~ 3.175mm
Blade length range:3mm ~ 14mm
Single station CNC
Grinding diameter:0.1-2.0 mm (0.004”-0.080”)
Chuck:B8
Cutting length:0-15 mm (0-0.6”)
Helix angle:24-45o
Total length:30-50 mm (1.2”-1.5”)
OD inspection machine
Scope of the inspection:φ0.1~φ3.175mm
Laser gauge:Least 0.0001mm , Measurement Accuracy 0.002mm
Separate collection trough is divided into 13 slots, which yield a total of
10 categories slot slot slot defective classification of 3 slots.
Product inspection machine
CCD Check:
Diameter, gaps, overlaps, separately, the core thickness, eccentricity,
the size of face, head size, both inside and outside the arc, the blade
width , ditch towel ratio, rounded corners, the center line is not straight ,
split bad, length, etc.。
Automatic re-grind machine
1 、Automatic length check and grinding angle is adjusted automatically.
2、 After grinding, in addition to automatically check the entire blade
surface imaging determination shall also be secondary grinding.
3、Regrind education and training need to do, you can simply set the
operation.
4、Reduce regrind labor costs.
5、Into the material setting is simple, and according to customer
requirements and design material box fixture.