 |
Automatic re-grind machine
♦ for miniature PCB bit (0.1 ~ 0.5mm).
♦ Automatic length checking.
♦ blade surface images automatically checked.
♦ 1 person can manage more than 6 then research machine.
♦ Use material box into the material, setting simple.
♦ Automatic length checking.
♦ blade surface images automatically checked.
♦ 1 person can manage more than 6 then research machine.
♦ Use material box into the material, setting simple.
Product inspection machine
♦ The following applies to 1.0mm miniature PCB drill bit.
♦ Check item : OD / gap / overlap separated / core thickness /
Eccentric / size face / size head / outside
Solitary / blade width / groove towel over fillet / Medium
Line is not straight / bad split / full length.
♦ according to customer demand.
♦ Check item : OD / gap / overlap separated / core thickness /
Eccentric / size face / size head / outside
Solitary / blade width / groove towel over fillet / Medium
Line is not straight / bad split / full length.
♦ according to customer demand.
RGV
♦ rail carrier truck, super bottom PASS LINE may end at 1M.
♦ for clean room environments.
♦ Load: 260KG, can be customized to customer needs.
♦ for clean room environments.
♦ Load: 260KG, can be customized to customer needs.
Lock screw machine
♦ specifically for small screws, 2.0mm less screw apply.
♦ with CCD automatic alignment, improve positioning accuracy.
♦ lock screw can be controlled multi-segment curve.
♦ locking screw can be measured after the locking screw after
♦ with CCD automatic alignment, improve positioning accuracy.
♦ lock screw can be controlled multi-segment curve.
♦ locking screw can be measured after the locking screw after
highly recognized quality.
